FrSky Taranis X9D 2.4GHz ACCST Transmitter,Up to 16 channels,Full Telemetry RSSI alarms,Selectable flight mode,Combines with CompanionTX,perfect for RC models.
Description:
Brand Name: Frsky
Item Name: FrSky Taranis transmitter
Specification:
Up to 16 channels
Four ball bearing gimbals
Two-modules, two systems
- one internal FrSky 2.4G module fitted
- external JR module slot
For Spektrum DSM-2 and DSM-X
Three selectable modes
- D8 (8ch telemetry)
- D16 (16ch full duplex telemetry)
- LR12 (12ch long x3 range non-telemetry)
TX with factory-installed software
- ready to programme and use
Simple Mode Change
- no need to open the case at all
Super-low latency (approx 1/3 of current)
FrSky Receiver Match
RSSI - Received Signal Strength Indication
FrSky Smart Port
Audio speech output
- alarms, values, settings etc
212x64 backlit LCD, USB, SD card slot
Feature:
Full Telemetry RSSI alarms (Received Signal Strength Indication)
Self test of the transmitter antenna
Up to 16 channels (more when combined with external module)
60 model memories
64 mixers, 9 flight modes
16 custom curves with 3-17 points each, 32 logic switches
Voice or custom sound alerts
USB port and SD card slot
Long range system capable of up to 3 times the range of current 2.4 systems
Four bearing gimbals
State-of-the-art open source software
Super low latency for ultra quick response (9ms)
Large 212 X 64 backlit LCD screen
Real-time data logging
Receiver lock (programme locked to aircraft - limited to FrSky receivers running PXX protocol)
JR Style module bay for additional RF modules
Selectable flight mode (1, 2, 3, or 4)
2 timers, count up or down, throttle %, talking, etc.
Trims - Adjustable from course to extra fine with extended and exponential trims
Standard trainer jack
ARM Cortex M3 32-bit 60MHz
Combines with CompanionTX – a FREE computer program for transmitter setup. CompanionTX (Windows/Mac/Linux) can be used to set-up models, save, edit and share models and settings as well as simulate transmitter and model setup.
USB connection for firmware upgrades, sound editing, read and write to the microSD card and integrate with CompanionTX
Sticks and pots can be calibrated by the end user
Multiple language support (Radio arrives configured for English language)
Open source community-driven firmware
English manual,please click here!
Note: The X8R receiver is not included, if you are in need of the receiver,please click here!
Package Included:
1 x transmitter
1 x battery
1 x charger
1 x manual
1 x aluminum case
1 x neck strap
Brand Name: Frsky
Item Name: FrSky Taranis transmitter
Specification:
Up to 16 channels
Four ball bearing gimbals
Two-modules, two systems
- one internal FrSky 2.4G module fitted
- external JR module slot
For Spektrum DSM-2 and DSM-X
Three selectable modes
- D8 (8ch telemetry)
- D16 (16ch full duplex telemetry)
- LR12 (12ch long x3 range non-telemetry)
TX with factory-installed software
- ready to programme and use
Simple Mode Change
- no need to open the case at all
Super-low latency (approx 1/3 of current)
FrSky Receiver Match
RSSI - Received Signal Strength Indication
FrSky Smart Port
Audio speech output
- alarms, values, settings etc
212x64 backlit LCD, USB, SD card slot
Feature:
Full Telemetry RSSI alarms (Received Signal Strength Indication)
Self test of the transmitter antenna
Up to 16 channels (more when combined with external module)
60 model memories
64 mixers, 9 flight modes
16 custom curves with 3-17 points each, 32 logic switches
Voice or custom sound alerts
USB port and SD card slot
Long range system capable of up to 3 times the range of current 2.4 systems
Four bearing gimbals
State-of-the-art open source software
Super low latency for ultra quick response (9ms)
Large 212 X 64 backlit LCD screen
Real-time data logging
Receiver lock (programme locked to aircraft - limited to FrSky receivers running PXX protocol)
JR Style module bay for additional RF modules
Selectable flight mode (1, 2, 3, or 4)
2 timers, count up or down, throttle %, talking, etc.
Trims - Adjustable from course to extra fine with extended and exponential trims
Standard trainer jack
ARM Cortex M3 32-bit 60MHz
Combines with CompanionTX – a FREE computer program for transmitter setup. CompanionTX (Windows/Mac/Linux) can be used to set-up models, save, edit and share models and settings as well as simulate transmitter and model setup.
USB connection for firmware upgrades, sound editing, read and write to the microSD card and integrate with CompanionTX
Sticks and pots can be calibrated by the end user
Multiple language support (Radio arrives configured for English language)
Open source community-driven firmware
English manual,please click here!
Note: The X8R receiver is not included, if you are in need of the receiver,please click here!
Package Included:
1 x transmitter
1 x battery
1 x charger
1 x manual
1 x aluminum case
1 x neck strap
No comments:
Post a Comment