X-uav Mini Talon EPO 1300mm Wingspan V-tail FPV Plane Aircraft Kit

The Mini Talon V-tail plane is the smaller version of the popular Talon Kit. The kit comes un-assembled with EPO and laser cut plywood parts.Runs 4S 14.8V 10,000mAh LIPO battery, flight times are long, and wing loading still low thanks to the generous wing area of the Talon. A generous fuselage compartment with large top hatch allows you to access your equipment and flight battery in any configuration you choose. It is a great plane for anything you want to throw at it.you can use these for site surveying, aerial mapping and FPV fun.

Recommend Parts (Package Not Included):

• 4+ Channel Transmitter and Receiver w/ V-tail mixing
• 4S 14.8V 5000-10000mAh LiPoly Battery
• 4 x 9g Servos
• 2814 1000KV Brushless Motor
• 40A Brushless Speed Control
• 9x4.5 propeller

X-uav Mini Talon Features:

• - The Mini Talon FPV V-tail Drone is the new little brother of the popular Talon FPV plane.
• - Its smaller size is great for packing with you on your favorite FPV safari.
• - Runs on 4S 14.8V 10,000mAh LiPoly battery, long flight times.
• - Low wing loading.
• - Generous fuselage compartment with large top hatch allows you to access your FPV equipment and flight battery in any configuration you choose. It is an open canvas for your FPV needs.
• - Kit - All assembly and equipment installation required
• - Moulded EPO airframe
• - Laser cut plywood motor mount and wing saddle frame
• - Mono-wheel landing gear protects bottom of fuselage
• - Large fuselage compartment accommodates many battery and equipment configurations.
• - Two Piece plug in wings with carbon wing tube

Notice: Kit only,not included other electronic parts.

Package Included:
1 x X-uav Mini Talon RC Kit

More information, please visit:X-uav Mini Talon
Related Posts:X-uav Mini Talon, smaller but large payload

Hisky Buzz HFW400 2.4G 3CH Micro RC Parkflyers BNF With HT8 Telemetry Module

Hisky Buzz HFW400 Description:

• Brand Name: Hisky
• Item Name: Micro Park flyer 3CH 2.4G RC Airplane
• Wing Span:400mm
• Length:352mm
• Height:147mm
• Flight Time: 15mins
• Battery: 3.7V 180mAh Lithium Polymer
• Charger: Dual port lithium-polymer
• Charging Time: About 50mins
• Remote Control: 1.5V 4 x AA battery (not included)
• Weight: About 37g
• Propeller diameter: 100mm
• Main Motor: 0716 Coreless
• Reduction gear ratio: 1:2.45
• BNF Version:comes with everything you need except for a transmitter

Hisky Buzz HFW400 Features:

• With Hisky HT8 Telemetry Module, you can use your own transmitter( Futaba,Walkera,JR or other transmitters)
• Modular design that makes replacement of broken parts quicker and easier
• Removable landing gear
• 2.4G radio technology eliminates interference so you can fly multiple planes at the same time
• Elevator, rudder and throttle provide true 3-channel flight and maneuverability
• Digital Trims- The four channel transmitter included in the ready-to-fly package has digital trim functions; if the aircraft is rolling or pitching slightly, this function will correct the slight variations in altitude.
• Reversing function- If the control surfaces on the aircraft are opposite to the transmitter inputs (For example- when an up elevator signal is given, the elevator goes down), the reversing function can correct this issue.

Hisky Buzz HFW400 Package Included:

• 1 x Micro Park flyer RC Airplane(without transmitter)
• 1 x HT8 Telemetry

For more please go to: Hisky Buzz HFW400

Gartt 450 DFC Torque Tube Version RC Helicopter Kit With Canopy and Blade

GARTT DFC 450TT 3D Electric Helicopter Kit (Align T-rex Compatible).Take a close look at the head and tail of this awesome machine. It's ultra light, yet rigid design is strong enough for even the most skitzophrenic of 3D helicopter pilots!

Gartt 450 DFC Description:

• Length: 635mm
• Height: 230mm
• Main Rotor Diameter: 710mm
• Tail Rotor Diameter: 158mm
• Motor Drive Gear: 13T
• Main Drive Gear: 150T
• Autorotation Tail Drive Gear: 106T
• Tail Drive Gear: 25T
• Drive Gear Ratio: 1:11.5:4.24
• Weight (w/o power system): 530g
• Flying Weight: Approx. 640

Gartt 450 DFC Features:

• Newly designed DFC low wind resistance rotor head assembly with reduced distance between rotor head and frame, effectively lowering the CG for better 3D performance.
• Single piece integrated design of main bearing block and servo mount.
• Single piece integrated design of anti-rotation guide and gyro mount.
• Single piece integrated landing gear.
• Newly designed high resolution swashplate.
• Single piece battery mount with integrated canopy mount designed to bring CG closer to disk plane.
• Highly rigid frame with single piece carbon side and bottom plates.
• Highly efficient shaft driven tail design.
• Weighted tail rotor blade grips to repel centripetal forces.
• Straight-up in-frame alloy rudder servo mount for improved geometry and better CG.
• Newly designed fiberglass canopy.
• Newly designed high strength main blade grips.
• Upgraded metal tail slider and tail slider control arm.

Gartt 450 DFC Package Includes:

• 1 x GARTT DFC 450TT Helicopter Kit (All Necessary Hardware)
• 1 pair Fiberglass Main Blades
• 1 x Fiberglass Canopy

Required items:(Not included)

• Lipoly Battery (2200mAh 3S)
• Brushless Outrunner Motor
• Flybarless Control Unit
• ReceiverServos
• ESC

For more please go to: Gartt 450 DFC

Related Posts:Gartt 450 DFC RC Helicopter Kit With Canopy and Blade

IMAX X350 More Power 350W 15A Intelligent Touch Screen Charger

IMAX X350 Description:

• Manufacturer:iMAX
• Product:X350 Touch Screen Charger
• Screen Size:4.3 inch
• Resolution:480x272 pixel
• Circuit power:Max 350Watts(Charging) Max 40Watts(Discharging)
• Charge current range:0.1-15.0A
• Discharge current range:0.1-6A
• Balance current drain:LiPo 300mA/cell
• Lithium battery cell count: 1-6 series
• NiCd/NiMH 1-16 series
• Pb battery voltage:2 to 24V
• Dimension:148 x 140 x 48mm
• Weight:0.55kg
• System:IM·OS V2.11
• Operating Temperature:0-50℃
• Adapter Supports:11-18V 390W
• Max Charging Power:350W

IMAX X350 Features:

• Touch screen operation
• 32 Bit processor
• 4.3 inch touch screen display
• Modern iM·OS system
• Multi-Language customization
• USB Port
• A whole new product definition method
• All in one

IMAX X350 Package Includes:

• 1 x IMAX X350 Charger
• 1 x DC input cable
• 1 x All in one
• 1 x Touch pen
• 2 x Alligator clip

More information, please visit: IMAX X350
Related Posts: The coolest charger in the history

Hawk-eye Firefly 5S 12MP COMS HD DV WiFi Camera FPV

Hawkeye Firefly 5S Description:
Brand Name: Hawkeye
Item Name: Firefly 5S camera
Resoluton: 12M/8M/5M
AV Output Format : PAL/ NTSC
USB Port: compatible with Gopro Gimbals
Support HDMI output
Support max 64G TF card, class 10
Support WiFi

Hawkeye Firefly 5S Specification:
Size: 59 x 41 x 12mm ( compatible with GoPro camera)
Weight: 70g
Battery: 1600mAh (can be detached, compatible with Gopro3/3+ battery)
Working Voltage: 5V
Working + Charging Current: 800mA
Working Time: 2.5h
Charging Time: 2-3h
Compressed Format :  H264
Video/ Photo Format: *.MOV / *.JPG

Optics:
Diaphragm: F/2.0
Angle: 105 degree level, 140 degree diagonal

Mode: Normal Video; Normal Photography; Time Lapse Video; Delay Photography; 11  continuous shootings

Buttons:
Power Button:  Press once for power on, long press 3 sec. to turn off, Photo/ Record Mode switch.
OK Button: Start/ Stop recording
Up Button:  Enter menu/ Add options of menu; long press to turn on WiFi
Down Button: Enter menu/ reduce options of menu.

Hawkeye Firefly 5S Features:
Small, Light, 12MP HD camera
With WiFi function, can download the APP "FIREFLY" or scan the two-dimension code above , to transmit the live image to your phone.
Compatible with GoPro Camera accessories, includes batteries, gimbals and USB device etc.
More convenience for FPV system.

Hawkeye Firefly 5S Package Included:
1 x Camera
1 x Battery
1 x AV Power Cable
1 x USB Cable
1 x Lens Cover Case

For more please go to: Hawkeye Firefly 5S
Related Posts: Hawkeye Firefly 5S is the minimum camera in the world

Waterproof Backpack Nylon For DJI Phantom 3 Phantom 1&2 Vision Vision+

Waterproof Backpack Description:
Item Name:Waterproof Backpack
Color: black
Size: 48cm x 37cm x 21cm
Weight: 1700g
Usage: for Phantom 3,Phantom 2 Vision+, Phantom 2 Vision, Phantom 2, Phantom 1

Waterproof Backpack Features:
Durable wear resistant
Unique design creates an eye-catching visual effect.
Durable and strong enough, keep your DJI RC toy secure
Large capacity, very useful and convenient to use.
Unique adjustable shoulder strap design will give your shoulder comfortable touch.
This backpack is good for outdoor use.
Will not shrink or fade after washing, wear-resistant and waterproof.
With side pockets for storing and holding mobile phones, cards or other RC accessories.

Note:Not included any quadcopters.

Waterproof Backpack Package included:
1 x Waterproof Backpack

For more please go to: DJI Phantom 3 Waterproof Backpack